Well, tonight was the night. I glued the forward hinge mounting blocks to the upper and lower spar caps. This means that I now have a spar and not just two spar caps. I had to size the blocks down in my planer to get the correct height to match the foam ribs and get the thickness to match the spar caps. When I was clamping everything together I noticed that one of the spar caps had a slight twist to it. I believe that this will go away once I glue the plywood shear webs in place. I just need to make sure that the webs are glued 100% flat.
Number of hours: 1.5
Total hours: 208.1
No comments:
Post a Comment